Search results

Ok working on coming up with a way to convert a qsb4.5 to front gear train. 1st option I've come up with is use a 3.9 crank o have here using common rail front gear train crank gear, .080" longer wagler rods, dodge front cover and modify harness ect to use factory wiring harness. 2nd option I...

Anybody making a trip east looking to have 2 engines shipped in from mark Nixon to me in eastern pa

I know it was just released but I'm looking for some information on the new hd tuning. I'm sure guys are playing with it. I'm interested in what the limitations are. The project I have in mind is building a qsb4.5 common rail to replace the ppump 4bt in my ranger. If the tuning is able to...

Currently has 97k miles on it, was just professionally detailed. Rear of bed panel has a paint crack in it not sure why and the Trans pto cover looks like it may be seeping. Otherwise in perfect working condition. Tires are maybe 25% Modifications and major service work is as follows At 58k cab...

Working on my 4bt drag truck/street toy. Have it up and running but having an issue with fuel pressure I don't quite understand and am looking for some input. Fuel system I built was using #line from sump to an ff105 filter before pump, Aeromotive fuel pump then to a 5micron fleet guard filter...

Running a set of 5x.016 injectors in my 4bt. Had the fuel pump benched and flowed. Making quite a bit more fuel. Currently I have basic 5x.016 vco injectors from dap. Figured I'd see if somebody has some injectors laying Around that have one bad in a set before I buy new. I'm on a budget...

I'm trying to get some solid info on what works, running a 47rh in my 4bt ranger and low and behold the dipstick don't work. I bent it and made it work previously but now with the compound setup I'm in need of other options. I've heard stay away from the flexible options but I'm kinda headed...

Looking for some info on guys running a Hamilton cam in a 4bt. Hamilton has always been the cummins cam to use. Lots of them out there and few problems I ever heard of. So when I built my 4bt I decided to go Hamilton direction. 188/220 cam, beehive springs, locks/keepers, pushrods the whole...

I figured if post up here to see if someone had a cheap 12v aftermarket manifold. I am having a hard time spending $700 on a 4 cyl steed speed. If I found a decent one cheap I'd cut it and plate it like I did the factory 12v dodge one I'm running now. Thanks Rodney

I posted looking for info on my 4b previously and didn't get any response. Made up my mind and am building a he351/hx55 setup cause I have both turbos here already. Working on hot pipe now; my delema is I have a 90* discharge for turbo here that has a 3" downpipe flange on it that I'm either...

Anybody have any other contact info other than his cell? I bought a set of Brazil rods 3 weeks ago and still have not got them. Been trying to get ahold of him with no response for a week now.

This year I've been racing my 4bt with single he351 turbo, home made spring gate and a 55shot of nitrous. Best run was 12.80@106. I'm very happy with that out if what it is. This wintert plan is to rebuild motor with marine style standard compression pistons. Currently they were decked .080"...

As the title says I hve been looking in for sale section and haven't found a complete set. If anybody has some please let me know

Looking to see if anybody would like to trade a standard open exhaust housing for my gated one. Figured I was worth a shot.

I bought a bigger turbo to try on my 4bt instead of continuing to beat on the he351 I currently have on and am trying to locate a t3 housing for it. I bought turbo and a t4 adapter and the adapter I bought will not work with the 12v cut angled manifold I am running. Any help? Turbo is an...

I have 2 of them but neither have the oil bypass valve in the bottom. If Simone has one laying around that isn't cracked or anything last part needed for a 4b build if you have a dodge upper housing for the thermostat if probably take both. Thanks Rodney

Just throwing it out there, I thought maybe if somebody had an engine come part and still had 4 good rods I may be interested depending on price, let me know what you have. Must be stock length for 12v block. Going in a 4bt

Looking for a good usable front case as title says. Trans shop found crack in mine and it won't shim up correctly. Needs to be from 6.0 or 6.4 trans. Any help appreciated. Thanks Rodney

I have an he351 that I have been using on my 4b with good results. It bit the dust and I tried to put a rebuild kit in it and a billet wheel. It bit the dust again. Looking for one in good working order. Thanks Rodney

Looking for a Dana 80 carrier for a ford that will fit 3:73 gears preferably a limited slip Other option is a ring and pinion and limited slip carrier fora 10.5 sterling.