SCHMITTY
Not enough time
- Joined
- Jun 20, 2012
- Messages
- 1,188
Gathering parts for my stockish '94. The truck has the stock turbo, injectors,160 pump with 4ks. I have a ht4c with the 28cm exhaust. I plan on just using the 467 for now but wondering if the 4c would pair up well with the 467.*
Have-
467 and ht4c already
dpc triple 2400 stall 27 spline
built up 47rh
215 pump
4ks
vulcan dual feed
traction bars- on truck
150lb valve springs
yukon grizzly locker-intruck
diamond eye hx40 dp
tcs 27 spline input
firepunk comp 2 vb
need-
5x18s
delivery valves
4 5/8 flange to hx40
better retainers/keepers
sump
studs eventually
lift pump
t4 manifold
s400 compressor elbow
kdp
Bought this truck off a customer of mine. Came with the trans I built, locker. threw my old traction bars on. the 23 spline tcs shaft twisted off on a 2-3 shift after i bought it. scored a 27 spline and stator support for 600$. Just got the converter back, freshened up 467. The 215 pump has been sitting in my shop for 5 years. Came off a good running truck. I want a solid 11 second 1/4 mile truck with just the 467. i also have a rebuilt hc5a f trim with a 51cm exhaust. I was going to put a smaller housing on the hc5 and compound my old semi with the ht4c but plans changed.
Going to be cruising around with 2400 stall and the stock charger fueling until late may. Id sell the big holsets if someone wanted them . Shipping would suck.
Have-
467 and ht4c already
dpc triple 2400 stall 27 spline
built up 47rh
215 pump
4ks
vulcan dual feed
traction bars- on truck
150lb valve springs
yukon grizzly locker-intruck
diamond eye hx40 dp
tcs 27 spline input
firepunk comp 2 vb
need-
5x18s
delivery valves
4 5/8 flange to hx40
better retainers/keepers
sump
studs eventually
lift pump
t4 manifold
s400 compressor elbow
kdp
Bought this truck off a customer of mine. Came with the trans I built, locker. threw my old traction bars on. the 23 spline tcs shaft twisted off on a 2-3 shift after i bought it. scored a 27 spline and stator support for 600$. Just got the converter back, freshened up 467. The 215 pump has been sitting in my shop for 5 years. Came off a good running truck. I want a solid 11 second 1/4 mile truck with just the 467. i also have a rebuilt hc5a f trim with a 51cm exhaust. I was going to put a smaller housing on the hc5 and compound my old semi with the ht4c but plans changed.
Going to be cruising around with 2400 stall and the stock charger fueling until late may. Id sell the big holsets if someone wanted them . Shipping would suck.