malibu795
2wd numb nut
- Joined
- Mar 12, 2007
- Messages
- 6,731
Just thought I would offer, mine collects dust.
Sent from my XT1575 using Tapatalk
Thanks
New valair 14 DD should hold ~1500tq ish
What was in it
Just thought I would offer, mine collects dust.
Sent from my XT1575 using Tapatalk
Electric pump. Ran one with an airdog on my ppump 24v. Figured out quickly it would not hold pressure like they said it would.
I once saw a guy hang the clutch on the input shaft of the trans, mate the trans to the engine, then bolt up the clutch thru the inspection cover...I thought that was pretty clever, no need to wrestle the trans around trying to stab it.
Sent from my iPhone using Tapatalk
The only draw back to this is the spacers on the intermediate plate will not shift if you don't tighten the clutch evenly and incrementally and Eaton told us they will void the warranty if they don't see marks from the spacers striking the flywheel on a clutch claim. We do it all the time, and it's nearly impossible to do a nodal mount transmission without loading the clutch.I once saw a guy hang the clutch on the input shaft of the trans, mate the trans to the engine, then bolt up the clutch thru the inspection cover...I thought that was pretty clever, no need to wrestle the trans around trying to stab it.
Sent from my iPhone using Tapatalk
For warranty, anything can be *****ed about.would the ***** about hanging the intermediate plate by a bolt like I did?