Turbonetics TQ
Turbonetics Turbochargers
- Joined
- Feb 24, 2007
- Messages
- 375
I have a FASS 150 on my 24v which was set up for the VP-44 and was wondering If I was able to convert it to a higher pressure model to support the P-Pump?
Also Is there a good pick-up tube kit to use the stock fuel slosh container in the tank. I currently have a 3/8" Line Going to the bottom of the tank and I would like to be able to run below 1/4 tank and not have fuel pressure problems.
Thanks
Also Is there a good pick-up tube kit to use the stock fuel slosh container in the tank. I currently have a 3/8" Line Going to the bottom of the tank and I would like to be able to run below 1/4 tank and not have fuel pressure problems.
Thanks