GOT-Torque
is
- Joined
- Jul 2, 2007
- Messages
- 5,284
All parts are from an 01 dodge and are used unless otherwise stated.
300M new axles w/ drive flanges $950 shipped
D80 37 spline ARB (had 4.88 gears) $550 shipped
D80 35 spline ARB (had 3.55 gears) $550 shipped
D80 dually rearend (drums) no carrier $350
D80 SRW rearend - the disc brakes have been modified for running duals (no carrier) $400
Mag-hytec cover $200
Nitrous Express NXD 4000 SX II dual stage progressive system w/ purge kit $800
12v timing gear housing with front cover $175
0.093" SS injection lines ppumped 24V $350
0.093" connector tubes $125 (no cores needed)
JL Machine 7x0.014 injectors tighten'd spray angle $750 no cores
Fluidampr w/ timing tape $350
PDI T4 manifold drilled in every runner for EGT probes $500
Billet front cover $275
Billet tappet cover w/ oring $150
Billet freeze plugs (three side plugs) $75
coolant bypass setup w/ Billet rear freeze plug $100
Radiator $150
Alternator $100
ECM $200
Fuel tank $150 (ECSB)
FASS 240 GPH fuel system $500
Aeromotive boost referenced fuel regulator $100
Cummins Red 24V valve cover (has additional breather installed) $125
24V head stock 45,000 miles $500
24V head heavy porting/polishing, oversize valve seats installed, dual valve springs w/ Ti retainers $1400
Set of 24V rods $200
Short block with RV275 pistons (ceramic coated on top), bigger bowls, lower ring lands, balanced rotating assembly, block stiffener plate, ARP main studs (Make offer)
billet 24V pushrods $150
T4 0.9 housing (new) $150
65mm billet compressor wheel (new) $450
87/80 Exhaust wheel (new) $375
All interior pieces for sale as well (seats, console, dash, heater box, radio, airbags, what ever) make offer
A few S400 chargers (details to come)
More parts to be added later...
Some parts can ship within a day or two. Others which may take more effort to remove will obviously take longer to get shipped out.
I'm not here to screw anyone over. If any prices are out of line let me know, going from memory and what I paid for some of it or what I have seen some of it sell for.
Help a fellow CompD member buy christmas presents for his kids... LOL
Can accept paypal or credit cards.
Only trades considered:
waterman fuel pump
dry sump oiling system
profab reverser and/or dropbox
probell clutch can
SQHD rearend
or a restrictor tube for my wallet... lol
300M new axles w/ drive flanges $950 shipped
D80 37 spline ARB (had 4.88 gears) $550 shipped
D80 35 spline ARB (had 3.55 gears) $550 shipped
D80 dually rearend (drums) no carrier $350
D80 SRW rearend - the disc brakes have been modified for running duals (no carrier) $400
Mag-hytec cover $200
Nitrous Express NXD 4000 SX II dual stage progressive system w/ purge kit $800
12v timing gear housing with front cover $175
0.093" SS injection lines ppumped 24V $350
0.093" connector tubes $125 (no cores needed)
JL Machine 7x0.014 injectors tighten'd spray angle $750 no cores
Fluidampr w/ timing tape $350
PDI T4 manifold drilled in every runner for EGT probes $500
Billet front cover $275
Billet tappet cover w/ oring $150
Billet freeze plugs (three side plugs) $75
coolant bypass setup w/ Billet rear freeze plug $100
Radiator $150
Alternator $100
ECM $200
Fuel tank $150 (ECSB)
FASS 240 GPH fuel system $500
Aeromotive boost referenced fuel regulator $100
Cummins Red 24V valve cover (has additional breather installed) $125
24V head stock 45,000 miles $500
24V head heavy porting/polishing, oversize valve seats installed, dual valve springs w/ Ti retainers $1400
Set of 24V rods $200
Short block with RV275 pistons (ceramic coated on top), bigger bowls, lower ring lands, balanced rotating assembly, block stiffener plate, ARP main studs (Make offer)
billet 24V pushrods $150
T4 0.9 housing (new) $150
65mm billet compressor wheel (new) $450
87/80 Exhaust wheel (new) $375
All interior pieces for sale as well (seats, console, dash, heater box, radio, airbags, what ever) make offer
A few S400 chargers (details to come)
More parts to be added later...
Some parts can ship within a day or two. Others which may take more effort to remove will obviously take longer to get shipped out.
I'm not here to screw anyone over. If any prices are out of line let me know, going from memory and what I paid for some of it or what I have seen some of it sell for.
Help a fellow CompD member buy christmas presents for his kids... LOL
Can accept paypal or credit cards.
Only trades considered:
waterman fuel pump
dry sump oiling system
profab reverser and/or dropbox
probell clutch can
SQHD rearend
or a restrictor tube for my wallet... lol