Jff24Gordn
FIRE
- Joined
- Jun 9, 2006
- Messages
- 1,961
I have been in the garage for the last 2 months. And here is whats duct taped to my truck right now. A Precision Turbo 6876, Garrett TV81 (85mm), TiAL F38 wastegate ran by a solenoid, big AFE filter, Haisley intercooler, BD turboguard (Tial 50mm blow off valve), NX 2 stage controller, The rest of the N2O setup is from a cheep ZEX kit, 12mm A1 studs, O rings, 60# valve springs, JL Machine injectors, 4k gov springs, HTT manifold, Hailsy street twin with old set of SBC 12 puck per side pulling disks.
I have my NX controller running the N2O on the 1st stage, the controllers 2nd stage is wired to a air solenoid on the wastegate line. If I hadnt bought the Zex kit last fall, I would have bought a NX kit. :bang *nx*
I made 3 runs at bowling green. The first, I lost a IC boot because I didnt tighten a clamp. The second run, I bogged the engine on launch and the 3rd try, I broke 4th synchro as the shifter went to the floor. None of my times were anything to write home over. I never sprayed the N2O because I didnt see a reason to try to blow it up if I couldnt get it off of the line.
I have my NX controller running the N2O on the 1st stage, the controllers 2nd stage is wired to a air solenoid on the wastegate line. If I hadnt bought the Zex kit last fall, I would have bought a NX kit. :bang *nx*
I made 3 runs at bowling green. The first, I lost a IC boot because I didnt tighten a clamp. The second run, I bogged the engine on launch and the 3rd try, I broke 4th synchro as the shifter went to the floor. None of my times were anything to write home over. I never sprayed the N2O because I didnt see a reason to try to blow it up if I couldnt get it off of the line.