Np271 1410 series front yoke P/N?

[ahale2772]

Does anyone know the spicer part number for a 1410 front driveshaft yoke for an np271?

 

[kleann]

Spicer #3-4-10951-1

 

[ahale2772]

thanks!!

 

[kleann]

You're welcome. We had to machine down the stock yoke and dirt cover to fit with that yoke, iirrc. But i don't know of any other bolt on yokes.

 

[ahale2772]

what do you mean the stock yoke and dirt cover?

 

[kleann]

http://quad4x4.com/images/qu11012sj_small.jpg
it's been a few years since we did it, but believe had to cut this piece in half almost and use it for the dirt cover.

 

[ahale2772]

Ohhhh so what your saying is you just added the dirt shield to the 1410 yoke

 

[kleann]

Ohhhh so what your saying is you just added the dirt shield to the 1410 yoke

Yeah that part number is just a regular end yoke. It's the best I could find after researching.

 

[ahale2772]

10-4 i just picked one up. Ill play with it And report back on how it all works.

 

[ahale2772]

So the yoke itself is the correct spline, but too short, so i chucked the ford flange on the lathe and parted a section to use as a spacer, that conveniently has the dirt shield on it. The ford shaft itself is what the seal rides on.

Thanks to kleen for the PN!

 

[kleann]

Yep, just like I did it. I knew you'd be able to figure it out!