EverydayDiesel
I drink diesel
- Joined
- Feb 12, 2016
- Messages
- 196
Hello I have a 2007.5 6.7L cummins that i recently flashed (with efi live v2 on a file that was "ok to flash") which went with no errors before during or after but for some crazy reason when I went to crank the truck it would not start. Now the ecm does not respond to anything, efi live keeps telling me that the ignition is off. (I have checked all the fuses which are fine and reset the battery). The weird part is this happened when I got a CSP5 switch and converted the base file to the CSP5 version. I sent the file to EFI Live V2 and they said the file checked as ok. The complete version of what I did can be found here https://forum.efilive.com/showthread.php?26342-HELP-ECM-DEAD-after-CSP5-Upgrade! but the consensus was that the ecm is dead.
So I ordered a new ecm from a salvage yard which has the same part number from the same year/model truck.
My question is, will I need to reprogram anything except the vin number on this new ecm?
Will this just be plug in play? Who has done this before?
Thanks in advance
So I ordered a new ecm from a salvage yard which has the same part number from the same year/model truck.
My question is, will I need to reprogram anything except the vin number on this new ecm?
Will this just be plug in play? Who has done this before?
Thanks in advance
Last edited: