TheSilverBullet
All the correction factor
- Joined
- Jan 30, 2012
- Messages
- 1,598
Going to be needing the flange for this. I don't want to run an elbow so I can eliminate a boot in a twin setup.
Stainless sells this
http://www.stainlessdiesel.com/index.php?route=product/product&path=53&product_id=144
Which I think is ridiculously over priced. So my research tells me the v band is 2.5 inches and a quick ebay search all I can come up with is an aluminum flange with an o ring. I'd like to keep my piping steel.
So Im thinking this
http://www.ebay.com/itm/2-5-V-Band-Flange-Clamp-Kit-for-Universal-Turbo-Exhaust-Downpipes/141413307416?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D29979%26meid%3D38385886eb37454b95a5fe7d760c6c07%26pid%3D100005%26rk%3D3%26rkt%3D6%26mehot%3Dpp%26sd%3D251658894234&rt=nc
I don't think it would be hard to chuck it up in a lathe and spin an oring groove in it. They also have a 2.5 to 3 steel v band adapter I thought about so I know I could weld it to 3 inch pipe.
Any other options out there?
Stainless sells this
http://www.stainlessdiesel.com/index.php?route=product/product&path=53&product_id=144
Which I think is ridiculously over priced. So my research tells me the v band is 2.5 inches and a quick ebay search all I can come up with is an aluminum flange with an o ring. I'd like to keep my piping steel.
So Im thinking this
http://www.ebay.com/itm/2-5-V-Band-Flange-Clamp-Kit-for-Universal-Turbo-Exhaust-Downpipes/141413307416?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D29979%26meid%3D38385886eb37454b95a5fe7d760c6c07%26pid%3D100005%26rk%3D3%26rkt%3D6%26mehot%3Dpp%26sd%3D251658894234&rt=nc
I don't think it would be hard to chuck it up in a lathe and spin an oring groove in it. They also have a 2.5 to 3 steel v band adapter I thought about so I know I could weld it to 3 inch pipe.
Any other options out there?