Problem child
Double nickel @
- Joined
- Nov 26, 2012
- Messages
- 61
So it's an 03 ccsb, 47re swap for nv4500, 271-d tease, 4:10 gears, this truck had a 10:50 rear in it and I swapped it out for an 11:50 with 4:10's. So now that I have recently put this nv4500 in it everything seemed fine till the first pull. Had a little bounce at the start and the tcase was broke, least that's what I thought. So took it apart, the input shaft was knocked out of it and things were moved around but nothing broke. Took everything out of it and checked it over looked good other than the bearing so replaced it. All back together and noticed the rear drive shaft has tension when unbolted. It'll want to make a quarter turn every time when unbolting it. I took the rear cover off the 11:50 pulled the carrier out and check to see if them were 4:10 gears, all is good. So my question is, is it normal for the rear drive shaft wanting to spring like that when I unbolt it? Sorry for it being so long but wanted you guys to get an idea what I was talking about. Thanks!