sucks balls david!!!!!
dont want to hear this-- compression test seems to be in order
Dang, man. That friggin' sux!
.
Thanks guys,
Thats my next step.... I'm going to go down to Jeff again tmrw or Thurs and we're goind to use his scanner to shut down each injector while idling COLD...
Once we isolate the hole (s) that stop the large amount of white smoke, then I'll start with that hole (s) for my compression test to see if it's just one hole / rod....
Only thing I can put my figure on is the possible Hydrolock of that cylinder back when I split one of my Old tips...
This has been occuring since then...I just kept it quiet until I could rule out an injector...
Weird thing is when its warm, man its runs pretty dang smooth and do major issues with the exception of the oil use and slight blow by..
I did notice this one thing though just a while ago... I was driving it easy on Stock programing...When I let it go to Zero Boost while coasting at 30-40 mph and then just kinda stab at the throttle, I get a small WHITE PUFF of smoke and then it goes to black... With just Little Stumble when I stab it...
When under almost any amount of boost, it seems Dead Smooth !! Weird!!
Any ideas??
(Sorry Don...I'll have a Mod move these post to a new thread I start ref. this rod / ring issue......Thank you again for the help)