bracker8040
New member
Might be worth finding out. Mine was done at 1.3 and head gasket only went 100k. When I opened it up liners were pretty low so put the thinner spacer plate in to get by. Just rebuilt it (twice) this summer and cut the bores and shimmed it so it could go back together right. A lot better piece of mind knowing it's right vs a bandaid like the thinner plate. A lot of people over look the liner protrusion and just drop the liners in and torque the head down without ever measuring.
Thank you for this. If I get closer to buying I’ll definitely ask about some of this stuff.