wildmanben
Farmboy...
- Joined
- Aug 28, 2006
- Messages
- 884
So yeah, what gear do you nv4500 and nv5600 guys pulling in? I have been doing good in 4th low, but 3rd low doesnt put enough load on the truck. But it works sometimes...
What gears and tire size are you running? I've been pulling in 3rd low with 3.55's and 31" tires and it seems to be ok but the next gear up looks like it would be to big of a jump.wildmanben said:So yeah, what gear do you nv4500 and nv5600 guys pulling in? I have been doing good in 4th low, but 3rd low doesnt put enough load on the truck. But it works sometimes...
Blackbumper said:What gears and tire size are you running? I've been pulling in 3rd low with 3.55's and 31" tires and it seems to be ok but the next gear up looks like it would be to big of a jump.
wildmanben said:3.55 gears and a 33" tire
max6gear said:with my zf..4th low.. which with 32" tires puts it at around 25mph at 3500rpm
just a little info from the "other side"
Blackbumper said:Are you still running the 5 spd? If so that is some major wheel speed assuming you are running around 4g that would be close to 40mph what tire are you running?
JOHNBOY said:Same here 4th low tight tracks 2nd high loose tracks. In the ZF6 5th gear is one to one.
When I finally get the engine back in I hoping for 2nd high tight tracks and 5th low loose track with 4000rpm down track. We ill see.:bang
Rods said:never can be too fast
bdp said:Are you going by accual #'s on the shifter or overall gear selection? The highest # on mine is 5 wich is over drive and 4 is one to one. I have been runnin 1 hi range but hits rev limiter too quick so I am gonna go to 4 lo and see how I do.