What injection pump is this?

W

Whitenightmare

New member
Joined
Jan 13, 2020
Messages
55
Not sure if the pic worked but it he tag says Bosch 903 ( I think) it’s on a 12v that I’m considering buying but don’t want to get stuck with a boat anchor
 

Attachments

  • 2BD42513-614C-4E12-AC73-B3D4903ADD8D.png
    2BD42513-614C-4E12-AC73-B3D4903ADD8D.png
    4.5 MB · Views: 0
@Snedge will know.

PM him.

If you end up with a boat anchor, he can also rework it for you.
 
It's an Bosch A pump, not a P pump. Must be a generator unit or something ?

According to Cummins it's used on the C series engine. 207 whopping horsepower at 2100 RPM
 
Last edited:
It’s on fb marketplace. Dude says it was in a jockey truck but it looks like it has the trans adapter for a generator or something. Anything other than a pump I would need to change to put it in a truck project?
 
Whitenightmare said:
It’s on fb marketplace. Dude says it was in a jockey truck but it looks like it has the trans adapter for a generator or something. Anything other than a pump I would need to change to put it in a truck project?
Click to expand...

If you can get the engine serial number I can tell you much more.
 
Also Snedge! I owe ya one for your advice on nv4500 bell housings when I trans swapped my 24v. You were totally right that they’re all the same.
 
No serial number but here’s a better picture
 

Attachments

  • B8DD93BD-EA6C-4F40-B5E4-D14941A2725E.png
    B8DD93BD-EA6C-4F40-B5E4-D14941A2725E.png
    4.3 MB · Views: 0
I crossed the Bosch number you provided to a Cummins part #.
Every application with that pump said C series (8.3) It does appear to be a B-Series though.
If you look at it, get the serial number from the tag on the gear housing and hit me up through PM. We can hammer it out easier that way.
 
Am I remembering correctly that something about the C-series pumps didn't work on the B's? Seems like it had to do with the oil drain.
 
Wonder if that was used for an irrigation pump. The 8.3L I bought was. Dunno.
 
Looks like the same pump as our 4440. They can be made to fuel well. One turn on the screw and some minor tuning made that tractor run very well.
 
That pump has 9.5mm plungers, that would be slow. I would call a pump shop if you want performance out of it.
 
You must log in or register to reply here.
Back
Top