rauautomotive
New member
- Joined
- Apr 26, 2008
- Messages
- 617
Looking for some input on what are good pistons to use on a Common Rail Build, it is a Drag truck.
They will need to be fly cut i don't want to go to much lower than stock compression.
I know Mahle and Arias make some just don't know what works best, any input would be great, thanks
They will need to be fly cut i don't want to go to much lower than stock compression.
I know Mahle and Arias make some just don't know what works best, any input would be great, thanks