Recent content by wdimig

Going to be buying a new truck guys, and don't really have a need for 2 trucks, soo it's time to get rid of the 97'. So the back story story behind the truck, bought it for a steal of price back in 2002 with 108k on the clock. Now the one big downfall if you could call it that is the truck has a...

looking at the spec's for each turbo, i see both offer a 73.8mm compressor, somewhere inbetween a s471, and a s475, obviously the 4502 has the bigger turbine, im thinking about doing a compound setup, would the 4202 suffice for a primary with a 82mm turbine with say a 1.15 T6 turbine housing, or...

hey i know i posted this in another seciton, just trying to get some more exposure, what are the differences between a 241dld that come out of a 47rh to a 47re?? i can get my hands on a 47rh dld transfer case, but it is going to be going behind a 47re, is the spedo being lost the only isssue? if...

what are the differences between a 241dld that come out of a 47rh to a 47re?? i can get my hands on a 47rh dld transfer case, but it is going to be going behind a 47re, is the spedo being lost the only isssue? if it is is there way to put a spedometer out of a 47re case into the rh case??? i...

hey guys, my brother blew up his NP241DLD while tryin to make it throught a snow bank today, anybody have one that's in good shape that they are looking to part with, or know of a place online that sell's good reman. cases?? truck is a 96' built HTS auto, nothin special. thanks for any help!!! Wes

first i want to thank Chris for a awsome turbo, and excellent customer service. he built me one heck of a turbo, i had some small isssues with installing it, but all were resolved, and i spoke with him about the issues, and should not be a problem in the future. i got the turbo last wenesday...

Blankets! they look awsome Levi!, guys pictures dont do justice, he is one hell of a blanket/sock maker! i got a manifold blanket, a turbo blanket, and 20' of wrap for the downpipe, i can't wait to get it all installed! ill have some pics up once i get the turbo. oh, and the manifold blanket...

has anybody done a compressor swap on a s300 and had problems with the turbo being out of balance?? ive been told that the turbine& shaft are balanced as an assembly, and the compressor is balanced by itself. do the 2 need to be balanced as an assembly, i know that holset doesent do this, just...

want to buy a 62mm s300 compressor, and housing for a 2nd gen. i have the 66/65/14, and i wan to put a 62 compressor on the turbo so that later down the road it will be more sellable. looking to buy a 62/68/14 with the race cover from ED, but it is going to be cheaper to sell the 62/65/14, and...

ok guys, i have read every thread on these two turbos untill i have gone cross eyed, the current turbo on the truck is the old sled puller 66/65/14, it just isn't the right turbo for the truck, turbine is smaller than the compressor, not a great wheel combination, the thing loves to surge most...

ok after reading the p7100 information thread, more specifically the rack travel thread that has the information on modding the afc, i removed the AFC, and the plate that i had just put in, and lost power with, i got a chance to pull the AFC apart. here's what i did, and found while in there. i...

has anyone ever had a set of studs come out of a truck that were pretty rusty at the block threads? most of the studs that came out of my truck were rusty, and a pia to remove, i am going to clean out the block threads, and bottom tap them. i really dont want to get a new set if i can avoid it...

ok guys, i got the old scool sled puller 66 turbo on my truck from HTT, i like the turbo, spools decent, but is lacking on the top end, too much backpressure, not enoigh flow. the current setup is a 66/14cm with a 65mm turbine. my question is has anybody changed thier setup to the 66 prostreet...

hey guys, want to know if anyone on here knows the hole size of the DDP stage 3, and 4 injectors, i was told that the stage 3's are around a 5x.012, and the stage 4's are a 5x.014. is this information correct? wes

hey all, just wanted to say hi, didnt know there was a competition site like this, pretty cool, anyway im over in Highland MD, im sure some of you know me, my user name is the same on all the diesel sites, anyway my rig is listed below.... wes