bgreen776
White Collar Fabricator
- Joined
- Jul 12, 2012
- Messages
- 578
I wouldn't worry about weight much. There are several trucks similar to how yours will be running around with skinny front runners.
On the street?
I wouldn't worry about weight much. There are several trucks similar to how yours will be running around with skinny front runners.
I received my copy of the SFI 25.5C spec yesterday; seems simple enough. :hehe:
I wanted to set the engine back a couple inches, which required modification of the firewall. Since I already had to cut the firewall I figured I might as well set the engine back a whole bunch.
I finally gathered enough information to pull the trigger on a 4 link kit today. The guys at Chris Alstons have been very patient, and lots of help.
Avenger 4 Link #780243 - Wishbone locator, 1/4" brackets with re-enforcement, 1-5/8" lower control arms, 1-3/8 uppers, and 32" outside to outside sway bar.
The kit will fit this axle once I finally get my wheels mounted up and can finish the order form. Fab9 Avenger #8263
The fab 9 housing is kind of heavy fyi.
Any suggestions?
I have looked at the mark Williams stuff but it is prohibitively expensive. Awesome. But nearly triple what I had planned on spending, and nearly double what I am planning on spending now.
#racegreen