DEZLFREK
my licence plate says it
- Joined
- Dec 13, 2009
- Messages
- 4,569
well finally its going together starting today.. so here are some pictures to go along with it..
the short block:
2001 marine storm block, .020 over with commercial bigger bowl pistons, .oo8 piston to wall, .150 valve reliefs, .017 potrusion, standard bearings, cummins block stiffener, arp rod bolts.
hamilton head; decked .060 to unshroud the valves some, back cut the valves to help low lift flow, hami springs set to 180psi at the seat and 380 over the nose.. these are some of the bare head pictures..
ill get some more tomorrow as things come together.. and for the next few days as it gets running..
the short block:
2001 marine storm block, .020 over with commercial bigger bowl pistons, .oo8 piston to wall, .150 valve reliefs, .017 potrusion, standard bearings, cummins block stiffener, arp rod bolts.
hamilton head; decked .060 to unshroud the valves some, back cut the valves to help low lift flow, hami springs set to 180psi at the seat and 380 over the nose.. these are some of the bare head pictures..
ill get some more tomorrow as things come together.. and for the next few days as it gets running..