cranked_dodge
Diesel Pro
- Joined
- Jul 31, 2007
- Messages
- 1,103
We are having issues with our engine and we are not sure what exactly our issue is coming from.
5.9CR fire ringed
running Scheid rings and 24V gasket cut for rings
fly cut pistons
electric water pump
hard filled block except for water pump area and top 2 inched of the block
so we run water through the top of the block and head.
110 lbs of boost
90-95 lbs drive pressure
5000rpm
We are pushing water out the overflow doesn't matter if we are at idle or under full load.
It increases the amount pushed under full load.
We have had the head checked for flatness and cracks.
Block has been checked
Fire ring depth is good.
We are not blowing the gasket out anywhere that we can see.
Running a 16lb rad cap.
Just looking for some thoughts on this as we have racked our brain on this for the full season
5.9CR fire ringed
running Scheid rings and 24V gasket cut for rings
fly cut pistons
electric water pump
hard filled block except for water pump area and top 2 inched of the block
so we run water through the top of the block and head.
110 lbs of boost
90-95 lbs drive pressure
5000rpm
We are pushing water out the overflow doesn't matter if we are at idle or under full load.
It increases the amount pushed under full load.
We have had the head checked for flatness and cracks.
Block has been checked
Fire ring depth is good.
We are not blowing the gasket out anywhere that we can see.
Running a 16lb rad cap.
Just looking for some thoughts on this as we have racked our brain on this for the full season