Truckers, lets see your rigs!

[Feed Bunk]

It looks sharp. I went through the same thing with 4state trying to get panelites for my T8. They were nice but ended up getting them through mhc and they were a little cheaper.

 

[SmokinCAT]

I was going to do some shopping around, but with the prices they had on the stacks that sealed the deal.

 

[BRE]

I wanna drive it! And stretch it, then drive it some more!

 

[Bobus]

Some fun with a 75K lbs Transformer:

Putting a 17' 10" Switch Gear Building down a 17' Alley in the dark with freezing Rain:

 

[SmokinCAT]

I wanna drive it! And stretch it, then drive it some more!

From experience, I can assure you it will never get stretched, as it sits it already pushes on the front end, especially with 1200 bushel of corn behind it. Nothing like pulling away from a stop sign to turn left and having it try to drive straight across with the wheels turned. Besides that it steers like ****, for as short as it is, it steers like the 240" wb international we have.

 

[Mr.T]

Move the Damn 5th wheel plate forward LOL

 

[Mr.T]

The "bend over" light just came on

 

[lorendiesel5.9]

Some fun with a 75K lbs Transformer:

You can axle that on 6 axles? Or did you add some jeeps and dollies in there?

 

[BRE]

From experience, I can assure you it will never get stretched, as it sits it already pushes on the front end, especially with 1200 bushel of corn behind it. Nothing like pulling away from a stop sign to turn left and having it try to drive straight across with the wheels turned. Besides that it steers like ****, for as short as it is, it steers like the 240" wb international we have.

Fine... Ruin all my fun with your realistic tendencies. Lol

 

[SmokinCAT]

Move the Damn 5th wheel plate forward LOL

We have, it's been moved as far forward as the rear frame section will allow. In my opinion it needs a heavier engine.

 

[SmokinCAT]

Fine... Ruin all my fun with your realistic tendencies. Lol

The stretching isn't completely out of the question, it just won't be this one, we have another one in the barn and if my old man gets his way it will go under the knife.

 

[BRE]

The stretching isn't completely out of the question, it just won't be this one, we have another one in the barn and if my old man gets his way it will go under the knife.

Oh yummy!

 

[Mr.T]

We have, it's been moved as far forward as the rear frame section will allow. In my opinion it needs a heavier engine.

3412 swap

 

[Bobus]

You can axle that on 6 axles? Or did you add some jeeps and dollies in there?

We Permitted it and ran it... Didn't have enough room at the destination to use the Stinger Axle.

 

[SmokinCAT]

3412 swap

Maybe a built 3408, but most likely if it gets a big motor it will stay beige. I need to go look at a cabover close to me, it's just a single bunk, but was built with a 3408 and is still together.

 

[Mr.T]

A KTA cummins should weigh enough lol

 

[1-5-3-6-2-4]

Ya the K19s are pretty awesome.

Sent from my HTC Desire HD A9191 using Tapatalk 2

 

[Mr.T]

Mmmmmmm.......love me some chicken lights

 

[SmokinCAT]

Here is a pic of the other cabover, she isn't much to look at yet.

 

[1-5-3-6-2-4]

Oh my. Love it.

Sent from my HTC Desire HD A9191 using Tapatalk 2