Recent content by Resolute_weldin

I just popped my alternator fuse Double checked my wiring to my tool box in the bed where the batteries are. Could that be because the temp sensor is still in the engine bay?

So I moved my batteries from under the hood to in the bed. All connections cleaned and grounded to frame. Batteries wired straight to starter and from starter to fuse box. Truck sat unhooked for over a month. When I turn the AC on the truck idles up to about 1300rpm. I can see because of my...

I've finally gotten my trans sorted out to hold that kind of power. 160 pump sitting at the house as well as studs, springs, and pushrods. The truck has a 362 and stainless manifold on it. Could I get a couple of pointers as far as what size DVs and injectors I should be looking at. Also can I...

What's out there that I can use to accomplish this? Do they make a block that has a battery lug and a couple of studs for eyelets on cables or if y'all have any ideas I would appreciate it.

Is this a good deal? Says it's an s475, but I dont know enough about housings to tell if it's genuine. Any input would be awesome. Look at this on eBay GENUINE BORG WARNER AIRWERKS S400 S400SX HIGH PERFORMANCE Turbo charger | eBay

How well do they fit on an s300 in the factory position? I know the canister actuator I had to bend, is it going to be the same story with a spring can?

Started doing a little digging around on the old weight loss idea because I got up at 4:30 am and got overloaded on caffeine. So apparently the weight of a steel dually wheel is 41 pounds from what I could find. I'm looking at a set of eagle alloy 16" wheels that the shipping weight is 19.80 a...

The truck is an 02 3500 4wd. Has a 62/71/12 and 7x.009s with a built trans and quadzilla. Truck has run well but felt a bit laggy, put one of Levi's blankets on and it really helped with spool up quite a bit, so it got me to looking and this seems like a good next step.

Got it in the mail yesterday and quality is superb! My truck has a 62/71/12 with 7x.009 injectors. Truck runs well, although the big hot side is a tad lazy. Anyways, got home and let the truck cool off enough I wasn't scalding myself trying to put the blanket on. Initial thought are that it's...

I've got an 02 4wd 3500 that I've been putting a little money into... It's got a built trans, new boots, 7x.009 SAC injectors and a 62/71/12 FMW. I changed the intake gaskets last night and drove it. It does fine in town (700ish on the EGTs) but out on the highway at 65-75 mph they stay pretty...