Search results

Looking for a used g56 girdle before I buy new or fab something.

Long story here but I'm hoping someone has ran into this before. Background on truck: 99 2500 ecsb, 4x4 5 speed. Edge drag comp, smarty, fass150hd, 100 hp ddp injectors, tunnel ram, steed speed t3 with an ED billet 63/68/.8ar. Southbend 3600 clutch and hydros and isspro gauges. 4inch exhaust...

MPI compound kit. $1350 -HE-351 flange hot pipe with T6 primary mount. Low pressure charge pipe is 2inch vband to a boot coupler on the secondary. Primary is supported off the hot pipe bracket to the top manifold bolts on cylinders 5 & 6. All compound piping is poweder coated metallic grey with...

As the title states, looking for one before I just buy new and kick myself when a used one comes up cheaper.

Have a full kit that I bought to run on my 07 but plans have changed. Don't feel like pushing the aluminum case g56 anymore. Compound piping kit was built by MPI. All cold pipes are powdercoated. Setup to run a s300 with hx40 turbine outlet and 3rd gen compressor cover. The piping is made to...

Truck needs brakes all the way around soon so looking at upgrades. Looking at the powerstop Z36 kit vs the ssbc kit on XDP. Any of you have experience with one or the other? Quick search showed some experience with the powerstops but not much on the ssbc in a 2500 application. Thanks ahead...

Getting ready to do this but was curious if my 07 style drop pitman arm will work or if I need an 09 drop pitman arm?

Charger has less than 500 miles on it. Changing my plans is the only reason I'm selling. Built by forced inductions, I bought it used but never ran it myself. Turbine housing has the hx40 outlet, compressor cover is 3rd gen style with a 3 inch opening. Cr boot still fit on. I have the hx40 to...

1.The measurements are 64/71/13. The exhaust housing is a stainless steel HTT housing. It is the common rail size exhaust outlet but I have a hx40 adaptor and the turbo is on my 99 currently. I have both the 2nd and 3rd gen compressor housings, both are polished. So this charger will fit 94-07...

Owned them just over a year only put about 1000 miles on them since I got them from CPP. Looking to go another route with the truck. Asking 650 shipped, no cores needed and I have PayPal.

I have an 01 24v engine that is torn down. I bought it already torn apart for a couple parts I needed. I have listed the big parts with prices, I have some small stuff not listed, I will try to answer inquiries quickly. I don't have the head, VP, ecm or pcm just to get those out of the way. I...

Anyone know where to find these where it doesn't cost 40 a bolt? The ones I need are the ones that align the axle up and down on the lower control arm going to the axle. LMC has them but would like to know if anyone else has another source. Called the local dealer and NAPA and they have...

Looking for a sac 7x12 injector or equivalent to spool a 64/71/13....

I am pretty sure I saw a chart inserted into a post that had how the different hole sizes and amount of holes compare for flow. I can't find it now and wondered if anyone has it handy to post up and I can copy it to my computer. Thanks Looking for a 200ish injector for a 64/71/13ss and I...

I am in the process of changing up my 99 and the next thing on the list is to sell my turbo and injectors in order to go bigger. TURBO Is a super 62/68/12 from Chris at Engineered Diesel with polished comp housing. It is a 2nd gen configuration with a t3 gates housing with the adjustable spring...

Like the title says looking for a set in good condition.

Is anyone running one on a daily driver? Does it pull a lot of crap off the bottom of the tank? Getting ready to install one soon and if you have any tips let me know.

Two weeks ago I installed South Bend's 3600 clutch with the upgraded hydros and had a question about adjusting the clutch safety switch part of it. As of right now I have to push the pedal darn near through the floor to get it to start. Where is there an adjustment on this so I don't have to...

Who on here has a new set I could buy?

I am in need of a clutch as the old BD gave way a little bit ago. I am looking at South Bend's 3600 non sfi and the 3850 sfi. I won't be pulling in a circuit or anything but I may hook once or twice. Of course I will be upgrading the input and hydros at the same time. My question is, the 3850...