Search results

Hey guys. Recently picked up a 93 D250 A518 club cab truck. Was kind of looking for a single cab to play with but this will serve as a multi purpose truck so I was ok with the extra cab room. As of right now this truck is totally stock. Pump has never been touched, and the exhaust/muffler is all...

Hey guys. I've been driving my 01 for about 2 years now. It has a built trans, intake, exhaust, airdog 150 and edge juice w/attitude CTS. I really like the edge. The truck is hooked to a trailer and on level 3 or lower most of the time. What I don't like is that it really seems to cut fuel back...

I know this an issue that has been discussed before. I have not been able to find any concrete answer for the problem though. Seems it could be different things. The truck is a 2001 24v Automatic. It has an Edge Juice CTS, intake, exhaust, air dog, and built auto. It is all stock and untouched...

Hey guys, built my own transmission and have put a little over 1000 miles on it so far. It had been working great. Yesterday we did a 220 mile round trip towing about 4000 pounds with no issues. However, when I got home I was backing the trailer in and had to put it back in drive. I noticed it...

Hey guys. I havent been real active on here in a long while. Havent done much to the old 94, but im hoping that will change in the near future. I did however buy a 2001 dually wth a dead 47re a while back. Pretty nice truck over all and I plan to leave it pretty much how it is to keep it...

Just wondering where is the best place to order a 47re stepped overdrive brake backing plate so that I can run 6 clutches instead of the stock 5? A link would be great if anyone has one. Thanks!

Hey guys, been a long time since I've been on here. I recently bought an 01 dually needing a transmission rebuild and decided to do it myself. The part I have a question about is what the service manual refers to as the Throttle Pressure Valve. Looking at the picture in the manual makes mine...

Yesterday while driving my truck I was pulling a load in overdrive with the lockup switch on. I was coming to a stoplight so I hit the O/D off button to force it into 3rd gear to help me slow down a little, but nothing happened. I've had the lockup switch for many years now and never had this...

Hey guys, we have a 6.4 F-550 at work which has unfortunately been a pain. It has spent several hours in the shop so far. Either way, it has 59k miles on it now, and the starter always engages fine, but somehow the flexplate has a bad spot on it? If it lands on that spot when you turn it off,it...

Hey guys, anyone know where would be the cheapest place to get the stock v-band clamp? Im looking for the one that clamps the cast elbow to the exhaust housing on the turbo. Obviously I can get one at the dealer, but I wondered if there might be a vendor that would have it for pretty reasonable...

We have an 08 F-550 at work with a little less than 40k miles on it. Recently it has been acting up. Sometimes after you drive it a little, you can shut it off and at times it wont start back. You can crank and crank and it wont start. But then normally, if you turn the key all the way back to...

Hey guys. Im looking for a 3rd gen 5.9 downpipe. The main part I need is the flange that clamps to the turbo so that I can weld it to my downpipe, but a whole downpipe would be fine with me too. The cheaper the better of course. Just PM me if you have anything. Thanks Eric

I guess it must be the summer air. Its been fairly hot here this summer and also pretty humid. My truck just doesent seem to like it. It seems to be spooling slower and smokes more. I guess its to be expected with the summer air. I have an exhaust leak under the hood(post turbo) and im...

Here is the 2.6 video from the central ky smokeout tonight. Ill have the workstock and 2.8 video's up probably tomorrow night after church. http://www.youtube.com/watch?v=8KmOPRd2_oQ Eric

So, where are they??? :woohoo:

I had to work on my rear end a little a while back and i took the pinion seal out and put it back in without getting a new one. Well, it had been leaking, so i replaced it a couple weeks ago. However, its still leaking just as bad as it was before. Everywhere i park, there is a small puddle...

I finally got dad to let me play with the plate on his stock 98 5 speed. It has had the AFC slightly loosened for a little while. So, I had one that I ground to work well with where his governor arm was set, and I put the plate around 1/2 way. Well, power was about the same as stock. Barely...

Hey guys. My Antenna wire that comes from the radio rusted into the antenna mount on the fender of the truck. So my radio quit working, and I need both parts. So I need: - Antenna wire that runs from the radio to the fender mount - A good fender mount that the wire plus into, and the antenna...

Hey guys, Im fixing to put another set of lines on my truck, maybe today. I was wondering what size hose fits over the stock transmission lines? I was going to pick up a few feet of it at Napa so that if anything needed to be spliced together(maybe the cooler lines running to the front to get...

I need 1 fitting for the transmission on my truck. Needs to be for the "new style" lines, the ones that thread onto the fitting. So the fitting should have 2 threaded ends on it, one side to thread into the transmission, and the other the line threads onto. Should have been standard on 96-2002...