Ghostman
24v crazy
- Joined
- Aug 24, 2012
- Messages
- 2,819
I wonder though if that applies to a full manual VB?
Sent from my iPhone using Tapatalk
Its low amp stuff. Not enough to tax a normal rocker switch. You are feeding the 12v solenoid power off the batt and just grounding the OD and lock up wires to complete the circuit correct? You do not feed those wires with power.
Its low amp stuff. Not enough to tax a normal rocker switch. You are feeding the 12v solenoid power off the batt and just grounding the OD and lock up wires to complete the circuit correct? You do not feed those wires with power.
Sometimes different TV Lever settings will clean up the 2-3 shift a little bit.
Where does it shift rpm wise with the external TV lever set to WOT?
I used to have a small 2-3 bindup when mine was shifting down around 2400 rpm, after getting that shift up to 3200 RPM, zero bindup, just smooth aggressive shift!
Well I have it set about 90% via the bolt. Don't wanna drop the pan again right now to loosen the bolt up lol. Could be also from my very tight direct clutch clearance? I'll drive it a little more. Seems it does better as it warms up.
Sent from my iPhone using Tapatalk